How to remove the bearing from the shaft? How many methods are there?1、 Percussion methodThe impact force is generally applied to the inner ring of the bearing, and should not be applied to the rolling elements and retaining frame of the bearing. This method is simple and easy to implement, but it i Read More »

How to remove the rear bearing of Jinhong tricycle1、 Demolition method:1. Disassemble the outer ring, remove the interference fit outer ring, and set several outer ring compression screws on the circumference of the shell in advance. Tighten the screws evenly while disassembling. These screw holes a Read More »

What are the uses of large ball bearings?Large ball bearings are mainly used in mechanical equipment that requires heavy loads and continuous operation. For example, large ball bearings play an important role in fields such as construction machinery, mining equipment, cement industry, agricultural m Read More »

The disassembly of bearings should be carried out with the same care as during installation. Be careful not to damage the bearings and their components, especially the disassembly of interference fit bearings, which is difficult to operate. So, in the design phase, it is important to consider in adv Read More »

The best method for cleaning bearingsMost of the newly purchased bearings are coated with grease. These oils are mainly used to prevent bearing rust and do not provide lubrication, therefore, they must be thoroughly cleaned before installation and use. The cleaning method is: bearings sealed with ru Read More »